On orders placed before midnight tonight (MST) (2/5/2012) (Free Shipping for lower 48 US only)

Exhaust Wrap & Heat Protection

Exhaust Wraps: The truth about Wrapping

I can't tell you the number of calls I get from customers who are interested in DEI exhaust wraps but are afraid that the wrap may damage their pipes. Though a credible concern, I'm not sure who started the rumor, but for some people this myth has been inaccurately embedded as common knowledge to many. Wrapping pipes will not damage your pipes.* It will not make the metal brittle or promote any enhanced corrosion. I've yet to see a picture of a header, turbo down pipe, or exhaust pipe that was damaged by wrap as one would think that with all the information and images available on the internet someone would have been able to provide proof of such negative occurrences. I was really shocked after reading several forum threads from the "self-proclaimed know-it-alls" that consistently post replies in response to inquiries from other members citing a story or rumor rather than from personal experience.

THE TRUTH
Basically, every time you start up an engine the exhaust system pipes heat up and undergo an aging process that is so nominal it would take 50+ years to actually see any kind of change in the metals composition. Exhaust wraps do accelerate this ageing process, but even so it could take up to 30+ years to see any real degradation of the metal "AND" even that would be nominal at best! The same applies to ceramic jet coatings so don't let anyone tell you otherwise (that it's better because it doesn't make a difference).

Recommendation
For MX applications, we recommend the 2"x15' wraps and the 1"x50' wraps for optimum protection against burns and for keeping your equipment in good shape. Exhaust wrap increases your horsepower as well as prevents dents.

*NOTE In rare instances rust and corrosion may occur on lower grade metals so be sure to use DEI HT Silicone Coating to repel water and debris.

We have made available product FAQ and Instruction sheets online in PDF format to assist you with selection and installation.

	Aluminum Plug Wire Sheath 3/4`` x 6`` (4-pack)  Item #: 010409  $15.01 Manufactured of the same material as Heat Sheath. The Plug Wire Sheath was designed as an inexpensive protection for plug wire boots or any spot on a plug wire that is close to heat and requires additional protection. The Aluminized Plug Wire Sheaths can also be used on lines, wires and hoses that need protection in a specific area. The Aluminized Plug Wire Sheaths are 6 inches long and 3/4 inches in diameter. Inexpensive Protection for spark plug boots Reflects radiant heat from headers and engine Easy to install Four per pack
	BOOM MAT Performance Acoustical Material - 12-1/2`` x 24`` Sheet (10 pack)  Item #: 050210  $135.95 Boom Mat is a simple and effective solution in eliminating squeaks, rattles, vibrations and unwanted engine and road noise. Constructed of a rubber-based (viscoelastic) polymer layer with an aluminum foil laminate outer facing, Boom Mat's strong adhesive backing is unaffected by extreme hot and cold temperatures, is corrosion resistant and can be applied to metals, painted areas, plastic, fiberglass, automotive coatings and difficult to bond surfaces to name a few. With an ultra strong adhesive backing it can be applied in horizontal, vertical and inverted applications as well as on complex shapes. In addition to being a superior sound absorber and a solution in controlling vibration over a wide temperature range, Boom Mat is also an excellent thermal insulator. Capable of damping annoying low frequency noise, Boom Mat also serves as a barrier to unwanted mid and high frequencies.
	BOOM MAT Performance Acoustical Material - 12-1/2`` x 24`` Sheet (20 pack)  Item #: 050212  $265.95 Boom Mat is a simple and effective solution in eliminating squeaks, rattles, vibrations and unwanted engine and road noise. Constructed of a rubber-based (viscoelastic) polymer layer with an aluminum foil laminate outer facing, Boom Mat's strong adhesive backing is unaffected by extreme hot and cold temperatures, is corrosion resistant and can be applied to metals, painted areas, plastic, fiberglass, automotive coatings and difficult to bond surfaces to name a few. With an ultra strong adhesive backing it can be applied in horizontal, vertical and inverted applications as well as on complex shapes. In addition to being a superior sound absorber and a solution in controlling vibration over a wide temperature range, Boom Mat is also an excellent thermal insulator. Capable of damping annoying low frequency noise, Boom Mat also serves as a barrier to unwanted mid and high frequencies.
	BOOM MAT Performance Acoustical Material - 12-1/2`` x 24`` Sheet (6 pack)  Item #: 050206  $87.95 Boom Mat is a simple and effective solution in eliminating squeaks, rattles, vibrations and unwanted engine and road noise. Constructed of a rubber-based (viscoelastic) polymer layer with an aluminum foil laminate outer facing, Boom Mat's strong adhesive backing is unaffected by extreme hot and cold temperatures, is corrosion resistant and can be applied to metals, painted areas, plastic, fiberglass, automotive coatings and difficult to bond surfaces to name a few. With an ultra strong adhesive backing it can be applied in horizontal, vertical and inverted applications as well as on complex shapes. In addition to being a superior sound absorber and a solution in controlling vibration over a wide temperature range, Boom Mat is also an excellent thermal insulator. Capable of damping annoying low frequency noise, Boom Mat also serves as a barrier to unwanted mid and high frequencies.
	BOOM MAT Performance Acoustical Material - 12`` x 12 1/2`` Sheet (2 pack)  Item #: 050200  $22.95 Boom Mat is a simple and effective solution in eliminating squeaks, rattles, vibrations and unwanted engine and road noise. Constructed of a rubber-based (viscoelastic) polymer layer with an aluminum foil laminate outer facing, Boom Mat's strong adhesive backing is unaffected by extreme hot and cold temperatures, is corrosion resistant and can be applied to metals, painted areas, plastic, fiberglass, automotive coatings and difficult to bond surfaces to name a few. With an ultra strong adhesive backing it can be applied in horizontal, vertical and inverted applications as well as on complex shapes. In addition to being a superior sound absorber and a solution in controlling vibration over a wide temperature range, Boom Mat is also an excellent thermal insulator. Capable of damping annoying low frequency noise, Boom Mat also serves as a barrier to unwanted mid and high frequencies.
	BOOM MAT Performance Acoustical Material - 12`` x 12 1/2`` Sheet (4 pack)  Item #: 050202  $32.95 Boom Mat is a simple and effective solution in eliminating squeaks, rattles, vibrations and unwanted engine and road noise. Constructed of a rubber-based (viscoelastic) polymer layer with an aluminum foil laminate outer facing, Boom Mat's strong adhesive backing is unaffected by extreme hot and cold temperatures, is corrosion resistant and can be applied to metals, painted areas, plastic, fiberglass, automotive coatings and difficult to bond surfaces to name a few. With an ultra strong adhesive backing it can be applied in horizontal, vertical and inverted applications as well as on complex shapes. In addition to being a superior sound absorber and a solution in controlling vibration over a wide temperature range, Boom Mat is also an excellent thermal insulator. Capable of damping annoying low frequency noise, Boom Mat also serves as a barrier to unwanted mid and high frequencies.
	BOOM MAT Performance Acoustical Material - 12`` x 12 1/2`` Sheet (8 pack)  Item #: 050204  $57.95 Boom Mat is a simple and effective solution in eliminating squeaks, rattles, vibrations and unwanted engine and road noise. Constructed of a rubber-based (viscoelastic) polymer layer with an aluminum foil laminate outer facing, Boom Mat's strong adhesive backing is unaffected by extreme hot and cold temperatures, is corrosion resistant and can be applied to metals, painted areas, plastic, fiberglass, automotive coatings and difficult to bond surfaces to name a few. With an ultra strong adhesive backing it can be applied in horizontal, vertical and inverted applications as well as on complex shapes. In addition to being a superior sound absorber and a solution in controlling vibration over a wide temperature range, Boom Mat is also an excellent thermal insulator. Capable of damping annoying low frequency noise, Boom Mat also serves as a barrier to unwanted mid and high frequencies.
	BOOM MAT Performance Acoustical Material - Spray-on (18 oz. can)  Item #: 050220  $14.95 Boom Mat Spray-On is an effective solution in eliminating squeaks, rattles, vibrations and unwanted engine and road noise. Eliminates road noise Dampens vibrations For hard to reach areas For interior and exterior Covers 20 square feet Dries to touch in 20 minutes Helps prevent rust
	Cell Saver - Battery Insulation Kit  Item #: 010480  $27.14 DEI's NEW Cell Saver is the Ideal protection for any automotive battery. Batteries are very susceptible to heat and vibration that could cause premature failure and hazardous leaks. Cell Saver is very capable and will absorb and neutralize any damaging leaky battery acids. DEI's Cell Saver's material is capable of withstanding radiant temperatures upto 2000 degrees.
	Cool Cover Air Intake Tube Cover Kit (36``long x 14`` wide)  Item #: 010417  $68.95 The Air Tube Cover Kit is designed to prevent air tubes from becoming heat sinks. Made of heat treated fiberglass with a reflective coating, the Air Tube Cover will reflect heat away from the air tube and allow cooler air to be introduced into the intake for a denser air/fuel charge. The Air Tube Cover can be installed/removed in seconds without the use of tools by a full-length hook & loop closure system. Easy ON for GO, Easy OFF for SHOW ! The air tube cover is availaible in a 36" long by 14" wide that can easily be cut to size for smaller applications.
	Cool Tube Extreme 1-1/2`` Black - 3` length  Item #: 010440  $30.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1-1/2`` Blue - 3` length  Item #: 010439  $30.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1-1/2`` Red - 3` length  Item #: 010438  $30.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1-1/2`` Silver - 3` length  Item #: 010437  $23.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original. An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1-1/4`` Black - 3` length  Item #: 010436  $26.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1-1/4`` Blue - 3` length  Item #: 010435  $26.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1-1/4`` Red - 3` length  Item #: 010434  $26.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1-1/4`` Silver - 3` length  Item #: 010433  $21.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1/2`` Black - 3` length  Item #: 010424  $18.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1/2`` Black - 9` length  Item #: 010444  $46.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1/2`` Blue - 3` length  Item #: 010423  $18.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1/2`` Blue - 9` length  Item #: 010443  $45.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1/2`` Red - 3` length  Item #: 010442  $45.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1/2`` Red - 3` length  Item #: 010422  $18.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1/2`` Silver - 3` length  Item #: 010421  $14.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original. An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original. An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1/2`` Silver - 9` length  Item #: 010441  $38.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1`` Black - 3` length  Item #: 010432  $24.95 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1`` Blue - 3` length  Item #: 010431  $26.97 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1`` Red - 3` length  Item #: 010430  $26.97 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 1`` Silver - 3` length  Item #: 010429  $22.52 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 3/4`` Black - 3` length  Item #: 010428  $24.05 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 3/4`` Black - 9` length  Item #: 010448  $58.13 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 3/4`` Blue - 3` length  Item #: 010427  $24.05 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 3/4`` Blue - 9` length  Item #: 010447  $58.13 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 3/4`` Red - 3` length  Item #: 010426  $24.05 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 3/4`` Red - 9` length  Item #: 010446  $58.13 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 3/4`` Silver - 3` length  Item #: 010425  $20.46 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool Tube Extreme 3/4`` Silver - 9` length  Item #: 010445  $47.39 An evolution from the original Cool-Tube that offers much more. More heat protection, up to 750 degrees. More flexibility, comes un-slit but can be easily slit to install on existing hoses or wires without removal. Lighter weight, 50% lighter that the original.
	Cool-Tape Plus TM 2`` x 60`  Item #: 010413  $66.98 Cool-Tape consists of a 1 mil aluminized material bonded to a light weight, woven fiberglass with super strong adhesive backing and release liner. Cool-Tape can reflect up to 1500 degrees of radiant heat. The uses are limited only by your imagination but common uses include wrapping wires or fuel lines and sealing openings in floor boards or firewalls. This is the finest heat shielding tape on the market Up to 1500 degree protection More flexible Strong adhesive Thin for a tight wrap
	Cool-Tape TM 1-3/8`` x 15`  Item #: 010408  $21.38 Cool-Tape consists of a 1 mil aluminized material bonded to a light weight, woven fiberglass with super strong adhesive backing and release liner. Cool-Tape can reflect up to 1500 degrees of radiant heat. The uses are limited only by your imagination but common uses include wrapping wires or fuel lines and sealing openings in floor boards or firewalls. This is the finest heat shielding tape on the market Up to 1500 degree protection More flexible Strong adhesive Thin for a tight wrap
	Cool-Tape TM 1-3/8`` x 30`  Item #: 010416  $37.99 Cool-Tape consists of a 1 mil aluminized material bonded to a light weight, woven fiberglass with super strong adhesive backing and release liner. Cool-Tape can reflect up to 1500 degrees of radiant heat. The uses are limited only by your imagination but common uses include wrapping wires or fuel lines and sealing openings in floor boards or firewalls. This is the finest heat shielding tape on the market Up to 1500 degree protection More flexible Strong adhesive Thin for a tight wrap
	Cool-Tube TM 1/2`` I.D. x 15`  Item #: 010415  $73.60 Cool-Tube is designed to protect wiring, fuel lines, brake lines and other areas from extreme heat (up to 500 degrees F). Manufactured from convoluted NYLON 6 tubing (NO PLASTIC) and covered with an aluminized fiberglass fabric, Cool-Tube combines flexibility with maximum thermal protection. The aluminized covering provides heat reflectivity reducing temperatures an average of 43 percent and resists abrasion, chemicals and condensation. Slit lengthwise for ease of installation, Cool-Tube eliminates the necessity of disconnecting wires or lines. Protects wiring, fuel lines, brake lines, etc. Protection up to 500degress F. Combines flexibility with maximum thermal protection Reduces temperature an average of 43% Slit lengthwise for ease of installation
	Cool-Tube TM 1/2`` I.D. x 36``  Item #: 010414  $23.32 Cool-Tube is designed to protect wiring, fuel lines, brake lines and other areas from extreme heat (up to 500 degrees F). Manufactured from convoluted NYLON 6 tubing (NO PLASTIC) and covered with an aluminized fiberglass fabric, Cool-Tube combines flexibility with maximum thermal protection. The aluminized covering provides heat reflectivity reducing temperatures an average of 43 percent and resists abrasion, chemicals and condensation. Slit lengthwise for ease of installation, Cool-Tube eliminates the necessity of disconnecting wires or lines. Protects wiring, fuel lines, brake lines, etc. Protection up to 500degress F. Combines flexibility with maximum thermal protection Reduces temperature an average of 43% Slit lengthwise for ease of installation
	Cool-Tube TM 3/4`` I.D. x 15`  Item #: 010407  $82.26 Cool-Tube is designed to protect wiring, fuel lines, brake lines and other areas from extreme heat (up to 500 degrees F). Manufactured from convoluted NYLON 6 tubing (NO PLASTIC) and covered with an aluminized fiberglass fabric, Cool-Tube combines flexibility with maximum thermal protection. The aluminized covering provides heat reflectivity reducing temperatures an average of 43 percent and resists abrasion, chemicals and condensation. Slit lengthwise for ease of installation, Cool-Tube eliminates the necessity of disconnecting wires or lines. Protects wiring, fuel lines, brake lines, etc. Protection up to 500degress F. Combines flexibility with maximum thermal protection Reduces temperature an average of 43% Slit lengthwise for ease of installation
	Cool-Tube TM 3/4`` I.D. x 3`  Item #: 010406  $33.05 Cool-Tube is designed to protect wiring, fuel lines, brake lines and other areas from extreme heat (up to 500 degrees F). Manufactured from convoluted NYLON 6 tubing (NO PLASTIC) and covered with an aluminized fiberglass fabric, Cool-Tube combines flexibility with maximum thermal protection. The aluminized covering provides heat reflectivity reducing temperatures an average of 43 percent and resists abrasion, chemicals and condensation. Slit lengthwise for ease of installation, Cool-Tube eliminates the necessity of disconnecting wires or lines. Protects wiring, fuel lines, brake lines, etc. Protection up to 500degress F. Combines flexibility with maximum thermal protection Reduces temperature an average of 43% Slit lengthwise for ease of installation
	Dyno Strap Heat Guard (36`` long x 5`` wide)  Item #: 010466  $46.01 Keep your Dyno Straps from burning through and letting the car go flying in a wall! This product offers burn-through protection for dyno tie-down straps. Made of a high-temperature resistant aluminized mylar material, the Dyno Strap Heat Guard will withstand 500°F direct heat and 2000°F of radiant heat. It measures 5” wide by 3 feet and easily slips over dyno tie-down ends and slides over strap to be positioned near the area where exhaust heat exits. Protect dynamometer tie-down straps from burn-through from exhaust exit heat Made of hi-temp resistant aluminized material Withstands500°F direct / 2000°F radiant heat Easily slips over dyno tie-down strap Adjust to desired location near source of exiting exhaust 36” long x 5” wide
	Fire Sleeve & Tape Kit 1`` ID x 36``  Item #: 010474  $35.52 DEI Fire Sleeve and Tape Kit is the ideal in protecting against intense under hood heat making it the perfect solution for protecting hoses, oil and fuel lines and electrical wiring. Constructed of a woven fiberglass braided sleeve heavily coated with 100% iron oxide silicone rubber is capable of withstanding temperatures 500 degrees F continuous and up to 2000 degrees F intermittent.
	Fire Sleeve & Tape Kit 3/8`` ID x 36``  Item #: 010470  $24.06 DEI Fire Sleeve and Tape Kit is the ideal in protecting against intense under hood heat making it the perfect solution for protecting hoses, oil and fuel lines and electrical wiring. Constructed of a woven fiberglass braided sleeve heavily coated with 100% iron oxide silicone rubber is capable of withstanding temperatures 500 degrees F continuous and up to 2000 degrees F intermittent.
	Fire Sleeve & Tape Kit 5/8`` ID x 36``  Item #: 010472  $28.32 DEI Fire Sleeve and Tape Kit is the ideal in protecting against intense under hood heat making it the perfect solution for protecting hoses, oil and fuel lines and electrical wiring. Constructed of a woven fiberglass braided sleeve heavily coated with 100% iron oxide silicone rubber is capable of withstanding temperatures 500 degrees F continuous and up to 2000 degrees F intermittent.
	Fire Tape 36 ft Roll  Item #: 010476  $42.88 Self-vulcanizing silicone tape bonds to it self without any form of adheasive. Prevents voltage leaks, and an extra level of heat and moisture protection. When streched and wrapped under tension, it bonds to itslef, creating an airtight, water-tight seal that is resistant to oils, fuels, acids, solvents, saltwater, road salt, and UV rays. It withstands 700 PSI and resists temperatures up to 500 degrees and as low as -76 degrees
	Fire Wrap 3000 - 1-1/2`` ID x 2 ft  Item #: 010479  $69.95 Constructed from a glass fiber sleeve, Fire Wrap 3000 features a heavily coated outer sleeve with a proprietary compound consisting of iron oxide silicone rubber. Using high temperature glass fiber thread, Fire Wrap 3000 is flame resistant with a hook-and-loop Velcro® edge closure design that is sewn internally for a simple and easy installation. Fire Wrap 3000 withstands repeated exposures up to 3000°F (1650°C) and 500°F (260°C) of direct continuous heat providing an excellent insulation barrier as well as protection against burns while working around engine bays.
	Fire Wrap 3000 - 1`` ID x 2 ft  Item #: 010478  $55.95 Constructed from a glass fiber sleeve, Fire Wrap 3000 features a heavily coated outer sleeve with a proprietary compound consisting of iron oxide silicone rubber. Using high temperature glass fiber thread, Fire Wrap 3000 is flame resistant with a hook-and-loop Velcro® edge closure design that is sewn internally for a simple and easy installation. Fire Wrap 3000 withstands repeated exposures up to 3000°F (1650°C) and 500°F (260°C) of direct continuous heat providing an excellent insulation barrier as well as protection against burns while working around engine bays.
	Fire Wrap 3000 - 5/8`` ID x 2 ft  Item #: 010477  $51.95 Constructed from a glass fiber sleeve, Fire Wrap 3000 features a heavily coated outer sleeve with a proprietary compound consisting of iron oxide silicone rubber. Using high temperature glass fiber thread, Fire Wrap 3000 is flame resistant with a hook-and-loop Velcro® edge closure design that is sewn internally for a simple and easy installation. Fire Wrap 3000 withstands repeated exposures up to 3000°F (1650°C) and 500°F (260°C) of direct continuous heat providing an excellent insulation barrier as well as protection against burns while working around engine bays.
	Floor and Tunnel Shield 2` x 21`` (3.5 square feet)  Item #: 050501  $39.95 This revolutionary material adds a new dimension to control heat with minimal clearance needed, only 3/16 inch�! The Floor and Tunnel Shield is constructed utilizing an embossed 10 mil aluminum face bonded to a 1/8 inch composite fiberglass insulation and is backed with an aggressive adhesive that holds past 450 degree F. Capable of handling direct temperatures up to 1750 degrees f. Tough enough for under vehicle applications. This unique material can also block out up to 50% of unwanted road noise. Great sound barrier 1750 degree direct heat capabilities Self adhesive for easy installation Unique material works in harsh environments Can be cut with tin snips to any shape
	Floor and Tunnel Shield 4` x 21`` (7 square feet)  Item #: 050502  $89.98 This revolutionary material adds a new dimension to control heat with minimal clearance needed, only 3/16”! The Floor and Tunnel Shield is constructed utilizing an embossed 10 mil aluminum face bonded to a 1/8” composite fiberglass insulation and is backed with an aggressive adhesive that holds past 450º F. Capable of handling direct temperatures up to 1750 degrees f. Tough enough for under vehicle applications. This unique material can also block out up to 50% of unwanted road noise. Great sound barrier 1750 degree direct heat capabilities Self adhesive for easy installation Unique material works in harsh environments Can be cut with tin snips to any shape
	Floor and Tunnel Shield 4` x 42`` (14 square feet)  Item #: 050503  $239.98 This revolutionary material adds a new dimension to control heat with minimal clearance needed, only 3/16”! The Floor and Tunnel Shield is constructed utilizing an embossed 10 mil aluminum face bonded to a 1/8” composite fiberglass insulation and is backed with an aggressive adhesive that holds past 450º F. Capable of handling direct temperatures up to 1750 degrees f. Tough enough for under vehicle applications. This unique material can also block out up to 50% of unwanted road noise. Great sound barrier 1750 degree direct heat capabilities Self adhesive for easy installation Unique material works in harsh environments Can be cut with tin snips to any shape
	Heat Resistant Sealant, 3 oz. Tube  Item #: 010410  $21.77 This is the best product to install our Heat Screen (above), but the uses are limitless. Anytime you need to bond or seal around heat this is the product for you. Dow Corning developed this product for the extreme conditions faced by the aerospace industry. Use on fiberglass, metal, wood, rubber & plastic Peel strength of 20 lbs. Performs continuously at V85 to 500 degrees F.
	Heat Screen Aluminized Radiant Matting 36``x40``  Item #: 010401  $79.30 Heat Screen is capable of withstanding direct heat up to 1000 degrees F. on one side, while protecting against radiant heat up to 2000 degrees F. on the aluminized side. Heat Screen can be used to protect the driver¡¦s compartment from excess heat; to protect areas where excessive heat can blister paint; where exhaust pipes run close to the fuel tank; and many other applications too numerous to mention. This material can be applied with a high temperature adhesive, or fastened down with screws or rivets. Aluminized surface reflects 2000 degrees F Multitude of uses around race cars, boats, RVs & trucks Great protection for painted surfaces Used in aviation and aerospace industry
	Heat Sheath Aluminized Hose Line Sleeving (sewn) 1-1/2``x36``  Item #: 010420  $24.95 Heat Sheath™ is made from a Hi-Temp fiberglass fabric bonded to an aluminized material then sewn into a tube. Designed to slide over wires and hoses this product can be easily shaped to fit the tightest bends. The Heat Sheath™ will reflect up to 90% of the radiant heat and can insulate against up to 500 degrees direct continuous heat. Easily cut to length with scissors or a sharp knife. Reflects heat from wiring and hoses Easily cut to length
	Heat Sheath Aluminized Hose Line Sleeving (sewn) 1-1/4``x36``  Item #: 010404  $29.41 Heat Sheath™ is made from a Hi-Temp fiberglass fabric bonded to an aluminized material then sewn into a tube. Designed to slide over wires and hoses this product can be easily shaped to fit the tightest bends. The Heat Sheath™ will reflect up to 90% of the radiant heat and can insulate against up to 500 degrees direct continuous heat. Easily cut to length with scissors or a sharp knife. Reflects heat from wiring and hoses Easily cut to length
	Heat Sheath Aluminized Hose Line Sleeving (sewn) 1/2``x36``  Item #: 010418  $17.74 Heat Sheath™ is made from a Hi-Temp fiberglass fabric bonded to an aluminized material then sewn into a tube. Designed to slide over wires and hoses this product can be easily shaped to fit the tightest bends. The Heat Sheath™ will reflect up to 90% of the radiant heat and can insulate against up to 500 degrees direct continuous heat. Easily cut to length with scissors or a sharp knife. Reflects heat from wiring and hoses Easily cut to length
	Heat Sheath Aluminized Hose Line Sleeving (sewn) 1``x36``  Item #: 010419  $21.29 Heat Sheath™ is made from a Hi-Temp fiberglass fabric bonded to an aluminized material then sewn into a tube. Designed to slide over wires and hoses this product can be easily shaped to fit the tightest bends. The Heat Sheath™ will reflect up to 90% of the radiant heat and can insulate against up to 500 degrees direct continuous heat. Easily cut to length with scissors or a sharp knife. Reflects heat from wiring and hoses Easily cut to length
	Heat Sheath Aluminized Hose Line Sleeving (sewn) 3/4``x36``  Item #: 010403  $18.88 Heat Sheath™ is made from a Hi-Temp fiberglass fabric bonded to an aluminized material then sewn into a tube. Designed to slide over wires and hoses this product can be easily shaped to fit the tightest bends. The Heat Sheath™ will reflect up to 90% of the radiant heat and can insulate against up to 500 degrees direct continuous heat. Easily cut to length with scissors or a sharp knife. Reflects heat from wiring and hoses Easily cut to length
	Heat Shroud Aluminized Sleeving (Velcro) 1``x36``  Item #: 010405  $36.98 Heat Shroud™ is made from the same laminated material and offers the same great benefits as the Heat Sheath™ only adds the convenience of hook & loop closure. Easily install on wires or hoses that can not be easily removed. Heat Shroud™ offers the versatility of fitting diameters from ¾” to 1 ¼”. No need to remove wires and hoses Convenient hook & loop closure ¾” to 1 ¼” inch in diameter Reflects heat from wiring and hoses Easily cut to length
	Hi-Temp Shrink Tube Black 12mm x 1.5`` *  Item #: 010811  $20.57 The Hi-Temp Shrink Tubes have a shrink ratio of 3 to 1. Easily installed with an ordinary heat gun. 18mm size shrinks to 6mm and 12mm size shrinks to 4mm. Great finished look to any hose or wire Bundle wires as an alternative to plastic ties Protect electrical connections from elements 25 per package
	Hi-Temp Shrink Tube Black 18mm x 1.5`` *  Item #: 010810  $20.57 The Hi-Temp Shrink Tubes have a shrink ratio of 3 to 1. Easily installed with an ordinary heat gun. 18mm size shrinks to 6mm and 12mm size shrinks to 4mm. Great finished look to any hose or wire Bundle wires as an alternative to plastic ties Protect electrical connections from elements 25 per package
	Hi-Temp Shrink Tube Blue 12mm x 1.5`` *  Item #: 010831  $20.57 The Hi-Temp Shrink Tubes have a shrink ratio of 3 to 1. Easily installed with an ordinary heat gun. 18mm size shrinks to 6mm and 12mm size shrinks to 4mm. Great finished look to any hose or wire Bundle wires as an alternative to plastic ties Protect electrical connections from elements 25 per package
	Hi-Temp Shrink Tube Blue 18mm x 1.5`` *  Item #: 010830  $20.57 The Hi-Temp Shrink Tubes have a shrink ratio of 3 to 1. Easily installed with an ordinary heat gun. 18mm size shrinks to 6mm and 12mm size shrinks to 4mm. Great finished look to any hose or wire Bundle wires as an alternative to plastic ties Protect electrical connections from elements 25 per package
	Hi-Temp Shrink Tube Gray 12mm x 1.5`` *  Item #: 010801  $20.57 The Hi-Temp Shrink Tubes have a shrink ratio of 3 to 1. Easily installed with an ordinary heat gun. 18mm size shrinks to 6mm and 12mm size shrinks to 4mm. Great finished look to any hose or wire Bundle wires as an alternative to plastic ties Protect electrical connections from elements 25 per package
	Hi-Temp Shrink Tube Gray 18mm x 1.5`` *  Item #: 010800  $20.57 The Hi-Temp Shrink Tubes have a shrink ratio of 3 to 1. Easily installed with an ordinary heat gun. 18mm size shrinks to 6mm and 12mm size shrinks to 4mm. Great finished look to any hose or wire Bundle wires as an alternative to plastic ties Protect electrical connections from elements 25 per package
	Hi-Temp Shrink Tube Red 12mm x 1.5`` *  Item #: 010821  $20.57 The Hi-Temp Shrink Tubes have a shrink ratio of 3 to 1. Easily installed with an ordinary heat gun. 18mm size shrinks to 6mm and 12mm size shrinks to 4mm. Great finished look to any hose or wire Bundle wires as an alternative to plastic ties Protect electrical connections from elements 25 per package
	Hi-Temp Shrink Tube Red 18mm x 1.5`` *  Item #: 010820  $20.57 The Hi-Temp Shrink Tubes have a shrink ratio of 3 to 1. Easily installed with an ordinary heat gun. 18mm size shrinks to 6mm and 12mm size shrinks to 4mm. Great finished look to any hose or wire Bundle wires as an alternative to plastic ties Protect electrical connections from elements 25 per package
	Hi-Temp Shrink Tubes - 12mm x 4 ft-Black  Item #: 010833  $17.95 Professional grade flexible flame retardant polyolefin tubing provides excellent electrical insulation, protection from dust, solvents and other foreign material as well as providing strain relief. Overexpanded tubing easily fits over the end of connectors and shrinks down to 33% of its original diameter to fit snugly over wires and connectors for a water tight protective seal without reduction in tube length. Hi-Temp Shrink Tubes can be used to insulate wires, connections and terminals and meets the material and functional properties of Mil spec DTL-23053/5C. Offers a clean professional look Thick wall structure Protection from moisture and other elements Remains flexible Alternate to plastic ties and tape Meets MIL spec DTL-23053/5C 3 to 1 shrink ratio Easy to install using heat gun
	Hi-Temp Shrink Tubes - 18mm x 4 ft-Black  Item #: 010834  $19.95 Professional grade flexible flame retardant polyolefin tubing provides excellent electrical insulation, protection from dust, solvents and other foreign material as well as providing strain relief. Overexpanded tubing easily fits over the end of connectors and shrinks down to 33% of its original diameter to fit snugly over wires and connectors for a water tight protective seal without reduction in tube length. Hi-Temp Shrink Tubes can be used to insulate wires, connections and terminals and meets the material and functional properties of Mil spec DTL-23053/5C. Offers a clean professional look Thick wall structure Protection from moisture and other elements Remains flexible Alternate to plastic ties and tape Meets MIL spec DTL-23053/5C 3 to 1 shrink ratio Easy to install using heat gun
	Hi-Temp Shrink Tubes - 24mm x 4 ft-Black  Item #: 010835  $23.95 Professional grade flexible flame retardant polyolefin tubing provides excellent electrical insulation, protection from dust, solvents and other foreign material as well as providing strain relief. Overexpanded tubing easily fits over the end of connectors and shrinks down to 33% of its original diameter to fit snugly over wires and connectors for a water tight protective seal without reduction in tube length. Hi-Temp Shrink Tubes can be used to insulate wires, connections and terminals and meets the material and functional properties of Mil spec DTL-23053/5C. Offers a clean professional look Thick wall structure Protection from moisture and other elements Remains flexible Alternate to plastic ties and tape Meets MIL spec DTL-23053/5C 3 to 1 shrink ratio Easy to install using heat gun
	Hi-Temp Shrink Tubes - 9mm x 4 ft-Black  Item #: 010832  $17.95 Professional grade flexible flame retardant polyolefin tubing provides excellent electrical insulation, protection from dust, solvents and other foreign material as well as providing strain relief. Overexpanded tubing easily fits over the end of connectors and shrinks down to 33% of its original diameter to fit snugly over wires and connectors for a water tight protective seal without reduction in tube length. Hi-Temp Shrink Tubes can be used to insulate wires, connections and terminals and meets the material and functional properties of Mil spec DTL-23053/5C. Offers a clean professional look Thick wall structure Protection from moisture and other elements Remains flexible Alternate to plastic ties and tape Meets MIL spec DTL-23053/5C 3 to 1 shrink ratio Easy to install using heat gun
	Hi-Temp Shrink Tubes - COMBO PACK - 9,12,18 & 24mm (2 foot lengths of ea.)  Item #: 010836  $32.49 Professional grade flexible flame retardant polyolefin tubing provides excellent electrical insulation, protection from dust, solvents and other foreign material as well as providing strain relief. Overexpanded tubing easily fits over the end of connectors and shrinks down to 33% of its original diameter to fit snugly over wires and connectors for a water tight protective seal without reduction in tube length. Hi-Temp Shrink Tubes can be used to insulate wires, connections and terminals and meets the material and functional properties of Mil spec DTL-23053/5C. Offers a clean professional look Thick wall structure Protection from moisture and other elements Remains flexible Alternate to plastic ties and tape Meets MIL spec DTL-23053/5C 3 to 1 shrink ratio Easy to install using heat gun
	Hi-Temp Spray Adhesive  Item #: 010490  $21.95 Ideal for automotive and marine headliners, trim and laminating, Hi-Temp Spray Adhesive is formulated to bond substrates that require either high bond strength and/or needs elevated temperature resistance. Hi-Temp Spray Adhesive provides high strength adhesion and bonds a wide variety of materials, including foams, fabrics, vinyl, wood, plastics and more. It has a specially designed three-way adjustable valve allowing the user to select the spray pattern that best suits the job. This multipurpose adhesive dries quickly and clear while forming a water-resistant bond. 10 oz can
	HT Silicone Coating - Aluminum  Item #: 010302  $14.95 The HT Silicone Coating provides lasting protection for any hot surface up to 1500 degrees. We recommend the use of this coating with our exhaust wraps because it seals the material and provides lasting protection from oil, dirt and road grime. Don't limit the use to exhaust header wrap, this products works well on headers, blocks, starters and even on your grill at home. Heat protection up to 1500 degrees Seals and protects exhaust wrap Many uses around the home and shop One can enough for V-8 headers
	HT Silicone Coating - Black  Item #: 010301  $14.95 The HT Silicone Coating provides lasting protection for any hot surface up to 1500 degrees. We recommend the use of this coating with our exhaust wraps because it seals the material and provides lasting protection from oil, dirt and road grime. Don't limit the use to exhaust header wrap, this products works well on headers, blocks, starters and even on your grill at home. Heat protection up to 1500 degrees Seals and protects exhaust wrap Many uses around the home and shop One can enough for V-8 headers
	HT Silicone Coating - White  Item #: 010303  $14.95 White HT Silicone Coating joins the popular selling Black and Aluminum premium high temp spray. The silicone additive penetrates and helps seal exhaust wrap while protecting against abrasions, hot oil spills, grease and road grime. In addition, HT Silicone provides protection from extreme heat that can potentially damage exhaust wrap while prolonging the lifespan of the wrap. HT Silicone Coating also has multiple uses around the home or shop. It's perfect for engine blocks, headers and even outdoor grills.
	HT Silicone Coating Assortment Case (6 Cans)  Item #: 010300  $57.95 Contains two cans of each HT Silicone Coating: White, Black & Aluminum White HT Silicone Coating joins the popular selling Black and Aluminum premium high temp spray. The silicone additive penetrates and helps seal exhaust wrap while protecting against abrasions, hot oil spills, grease and road grime. In addition, HT Silicone provides protection from extreme heat that can potentially damage exhaust wrap while prolonging the lifespan of the wrap. HT Silicone Coating also has multiple uses around the home or shop. It's perfect for engine blocks, headers and even outdoor grills.
	Hub & Rotor Shield  Item #: 010485  $64.29 The Hub and Rotor Cover is designed to protect professional mechanics and backyard do-it-yourselfers alike from the potential of serious burns. Working in and around hot brake drums and rotors such as changing shocks, springs or suspensions can be a painful experience without some type of protection. It’s not just for shielding against harmful hot spots but can also act as a guard against any sharp edges and protect against dirt, dust and airborne particles around the track, shop or backyard garage. Prevents potential serious burns or cuts Aluminized mylar adhered to fiberglass matting Withstand 2000°F radiant / 500°F of direct continuous heat. Protection against dirt, dust and airborne particles around track or shop
	Protect-A Boot & Wire Kit Black 2 Cylinder  Item #: 010711  $33.23 Everything you need to protect your entire ignition wire set in one convenient kit. The kit contains all the benefits of Protect-A-Wire™ packaged with color matched Protect-A-Boots™ and shrink tubes for a professional finish.
	Protect-A Boot & Wire Kit Black 8 Cylinder  Item #: 010712  $107.79 Everything you need to protect your entire ignition wire set in one convenient kit. The kit contains all the benefits of Protect-A-Wire™ packaged with color matched Protect-A-Boots™ and shrink tubes for a professional finish.
	Protect-A Boot & Wire Kit Blue 2 Cylinder  Item #: 010731  $33.23 Everything you need to protect your entire ignition wire set in one convenient kit. The kit contains all the benefits of Protect-A-Wire™ packaged with color matched Protect-A-Boots™ and shrink tubes for a professional finish.
	Protect-A Boot & Wire Kit Blue 8 Cylinder  Item #: 010732  $107.79 Everything you need to protect your entire ignition wire set in one convenient kit. The kit contains all the benefits of Protect-A-Wire™ packaged with color matched Protect-A-Boots™ and shrink tubes for a professional finish.
	Protect-A Boot & Wire Kit Red 2 Cylinder  Item #: 010721  $33.23 Everything you need to protect your entire ignition wire set in one convenient kit. The kit contains all the benefits of Protect-A-Wire™ packaged with color matched Protect-A-Boots™ and shrink tubes for a professional finish.
	Protect-A Boot & Wire Kit Red 8 Cylinder  Item #: 010722  $107.79 Everything you need to protect your entire ignition wire set in one convenient kit. The kit contains all the benefits of Protect-A-Wire™ packaged with color matched Protect-A-Boots™ and shrink tubes for a professional finish.
	Protect-A Boot & Wire Kit Silver 2 Cylinder  Item #: 010701  $33.23 Everything you need to protect your entire ignition wire set in one convenient kit. The kit contains all the benefits of Protect-A-Wire™ packaged with color matched Protect-A-Boots™ and shrink tubes for a professional finish.
	Protect-A Boot & Wire Kit Silver 8 Cylinder  Item #: 010702  $107.79 Everything you need to protect your entire ignition wire set in one convenient kit. The kit contains all the benefits of Protect-A-Wire™ packaged with color matched Protect-A-Boots™ and shrink tubes for a professional finish.
	Protect-A Boot 6`` Black (8-pack) - Spark Plug Boot Heat Shields  Item #: 010512  $65.95 Protect your Spark plug boots from the extreme heat generated by the headers or exhaust manifold. Made from a fiberglass composite material they will not cause arching like some metal shields on the market. They install in seconds and come in four vivid colors. If wires are touching exhaust we recommend wrapping the header with exhaust wrap in the problem area in addition to the Protect-A-Bootsâ„¢. Installs in seconds Fits most boots straight or angled Protects to 1200 degrees direct continuous heat
	Protect-A Boot 6`` Black (2-pack) Spark Plug Boot Heat Shield  Item #: 010511  $23.95 Protect your Spark plug boots from the extreme heat generated by the headers or exhaust manifold. Made from a fiberglass composite material they will not cause arching like some metal shields on the market. They install in seconds and come in four vivid colors. If wires are touching exhaust we recommend wrapping the header with exhaust wrap in the problem area in addition to the Protect-A-Boots. Installs in seconds Fits most boots straight or angled Protects to 1200 degrees direct continuous heat
	Protect-A Boot 6`` Blue (8-pack) - Spark Plug Boot Heat Shields  Item #: 010532  $65.95 Protect your Spark plug boots from the extreme heat generated by the headers or exhaust manifold. Made from a fiberglass composite material they will not cause arching like some metal shields on the market. They install in seconds and come in four vivid colors. If wires are touching exhaust we recommend wrapping the header with exhaust wrap in the problem area in addition to the Protect-A-Boot. Installs in seconds Fits most boots straight or angled Protects to 1200 degrees direct continuous heat
	Protect-A Boot 6`` Blue (2-pack) - Spark Plug Boot Heat Shields  Item #: 010531  $23.95 Protect your Spark plug boots from the extreme heat generated by the headers or exhaust manifold. Made from a fiberglass composite material they will not cause arching like some metal shields on the market. They install in seconds and come in four vivid colors. If wires are touching exhaust we recommend wrapping the header with exhaust wrap in the problem area in addition to the Protect-A-Bootsâ„¢. Installs in seconds Fits most boots straight or angled Protects to 1200 degrees direct continuous heat
	Protect-A Boot 6`` Red (8-pack) - Spark Plug Boot Heat Shields  Item #: 010522  $65.95 Protect your Spark plug boots from the extreme heat generated by the headers or exhaust manifold. Made from a fiberglass composite material they will not cause arching like some metal shields on the market. They install in seconds and come in four vivid colors. If wires are touching exhaust we recommend wrapping the header with exhaust wrap in the problem area in addition to the Protect-A-Bootsâ„¢. Installs in seconds Fits most boots straight or angled Protects to 1200 degrees direct continuous heat
	Protect-A Boot 6`` Red (2-pack) - Spark Plug Boot Heat Shields  Item #: 010521  $23.95 Protect your Spark plug boots from the extreme heat generated by the headers or exhaust manifold. Made from a fiberglass composite material they will not cause arching like some metal shields on the market. They install in seconds and come in four vivid colors. If wires are touching exhaust we recommend wrapping the header with exhaust wrap in the problem area in addition to the Protect-A-Boots. Installs in seconds Fits most boots straight or angled Protects to 1200 degrees direct continuous heat
	Protect-A Boot 6`` Silver (2-pack) - Spark Plug Boot Heat Shields  Item #: 010501  $23.95 Protect your Spark plug boots from the extreme heat generated by the headers or exhaust manifold. Made from a fiberglass composite material they will not cause arching like some metal shields on the market. They install in seconds and come in four vivid colors. If wires are touching exhaust we recommend wrapping the header with exhaust wrap in the problem area in addition to the Protect-A-Boots. Installs in seconds Fits most boots straight or angled Protects to 1200 degrees direct continuous heat
	Protect-A Boot 6`` Silver (8-pack) - Spark Plug Boot Heat Shields  Item #: 010502  $65.95 Protect your Spark plug boots from the extreme heat generated by the headers or exhaust manifold. Made from a fiberglass composite material they will not cause arching like some metal shields on the market. They install in seconds and come in four vivid colors. If wires are touching exhaust we recommend wrapping the header with exhaust wrap in the problem area in addition to the Protect-A-Boots. Installs in seconds Fits most boots straight or angled Protects to 1200 degrees direct continuous heat
	Protect-A Boot XL 8`` Silver (2-pack) - Spark Plug Boot Heat Shields  Item #: 010503  $23.95 Protect your Spark plug boots from the extreme heat generated by the headers or exhaust manifold. Made from a fiberglass composite material they will not cause arching like some metal shields on the market. They install in seconds and come in four vivid colors. If wires are touching exhaust we recommend wrapping the header with exhaust wrap in the problem area in addition to the Protect-A-Bootsâ„¢. Installs in seconds Fits most boots straight or angled Protects to 1200 degrees direct continuous heat
	Protect-A Boot XL 8`` Silver (8-pack) - Spark Plug Boot Heat Shields  Item #: 010504  $68.95 Protect your Spark plug boots from the extreme heat generated by the headers or exhaust manifold. Made from a fiberglass composite material they will not cause arching like some metal shields on the market. They install in seconds and come in four vivid colors. If wires are touching exhaust we recommend wrapping the header with exhaust wrap in the problem area in addition to the Protect-A-Boots. Installs in seconds Fits most boots straight or angled Protects to 1200 degrees direct continuous heat
	Protect-A-Wire Black 2 cylinder kit - Spark Plug Wire Heat Insulation  Item #: 010611  $18.67 This ignition wire sleeving protects against extreme underhood temperatures in vivid style. Made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. Easily installs on wires by removing the distributor boot and connector. Includes Hi-Temp Shrink Tubes for a sharp finished appearance. Protects to 500 degrees direct continuous heat Protects to 1200 degree radiant Can be used on any hose or wire up to 10mm
	Protect-A-Wire Black 8 cylinder kit - Spark Plug Wire Heat Insulation  Item #: 010612  $52.23 This ignition wire sleeving protects against extreme underhood temperatures in vivid style. Made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. Easily installs on wires by removing the distributor boot and connector. Includes Hi-Temp Shrink Tubes for a sharp finished appearance. Protects to 500 degrees direct continuous heat Protects to 1200 degree radiant Can be used on any hose or wire up to 10mm
	Protect-A-Wire Blue 2 cylinder kit - Spark Plug Wire Heat Insulation  Item #: 010631  $18.67 This ignition wire sleeving protects against extreme underhood temperatures in vivid style. Made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. Easily installs on wires by removing the distributor boot and connector. Includes Hi-Temp Shrink Tubes for a sharp finished appearance. Protects to 500 degrees direct continuous heat Protects to 1200 degree radiant Can be used on any hose or wire up to 10mm
	Protect-A-Wire Blue 8 cylinder kit - Spark Plug Wire Heat Insulation  Item #: 010632  $52.23 This ignition wire sleeving protects against extreme underhood temperatures in vivid style. Made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. Easily installs on wires by removing the distributor boot and connector. Includes Hi-Temp Shrink Tubes for a sharp finished appearance. Protects to 500 degrees direct continuous heat Protects to 1200 degree radiant Can be used on any hose or wire up to 10mm
	Protect-A-Wire Red 2 cylinder kit - Spark Plug Wire Heat Insulation  Item #: 010621  $18.67 This ignition wire sleeving protects against extreme underhood temperatures in vivid style. Made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. Easily installs on wires by removing the distributor boot and connector. Includes Hi-Temp Shrink Tubes for a sharp finished appearance. Protects to 500 degrees direct continuous heat Protects to 1200 degree radiant Can be used on any hose or wire up to 10mm
	Protect-A-Wire Red 8 cylinder kit - Spark Plug Wire Heat Insulation  Item #: 010622  $52.23 This ignition wire sleeving protects against extreme underhood temperatures in vivid style. Made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. Easily installs on wires by removing the distributor boot and connector. Includes Hi-Temp Shrink Tubes for a sharp finished appearance. Protects to 500 degrees direct continuous heat Protects to 1200 degree radiant Can be used on any hose or wire up to 10mm
	Protect-A-Wire Silver 2 cylinder kit - Spark Plug Wire Heat Insulation  Item #: 010601  $18.67 This ignition wire sleeving protects against extreme underhood temperatures in vivid style. Made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. Easily installs on wires by removing the distributor boot and connector. Includes Hi-Temp Shrink Tubes for a sharp finished appearance. Protects to 500 degrees direct continuous heat Protects to 1200 degree radiant Can be used on any hose or wire up to 10mm
	Protect-A-Wire Silver 8 cylinder kit - Spark Plug Wire Heat Insulation  Item #: 010602  $52.23 This ignition wire sleeving protects against extreme underhood temperatures in vivid style. Made from the same Hi-Temp composite fiberglass as the Protect-A-Boots. Easily installs on wires by removing the distributor boot and connector. Includes Hi-Temp Shrink Tubes for a sharp finished appearance. Protects to 500 degrees direct continuous heat Protects to 1200 degree radiant Can be used on any hose or wire up to 10mm
	Reflect-A-Cool 12`` x 12``  Item #: 010460  $13.95 Reflect-A-Cool a sheet of reflective material with an adhesive back which offers outstanding protection against extreme heat. A combination of fiberglass and an aluminized layer of reflective foil, Reflect-A-Cool is ideal for firewalls, marine engine bays, RV dog house� or in the tub of a racecar where typical mechanical fasteners cannot be used. Reflect-A-Cool will reflect up to 1000 degrees F and will protect against a direct continuous temperature of 400 degrees F. Superior protection against radiant heat Self adhesive for easy installation Can be easily trimmed and cut to fit Virtually NO clearance needed
	Reflect-A-Cool 12`` x 24``  Item #: 010461  $24.95 Reflect-A-Cool is a sheet of reflective material with an adhesive back which offers outstanding protection against extreme heat. A combination of fiberglass and an aluminized layer of reflective foil, Reflect-A-Cool is ideal for firewalls, marine engine bays, RV dog house or in the tub of a racecar where typical mechanical fasteners cannot be used. Reflect-A-Cool will reflect up to 1000 degrees F and will protect against a direct continuous temperature of 400 degrees F. Superior protection against radiant heat Self adhesive for easy installation Can be easily trimmed and cut to fit Virtually NO clearance needed
	Reflect-A-Cool 36``x48``  Item #: 010412  $63.95 Reflect-A-Cool is a sheet of reflective material with an adhesive back which offers outstanding protection against extreme heat. A combination of fiberglass and an aluminized layer of reflective foil, Reflect-A-Cool is ideal for firewalls, marine engine bays, RV, dog house� or in the tub of a race car where typical mechanical fasteners cannot be used. Reflect-A-Cool will reflect up to 1000 degrees F and will protect against a direct continuous temperature of 400 degrees F. Superior protection against radiant heat Self adhesive for easy installation Can be easily trimmed and cut to fit Virtually NO clearance needed
	Reflect-A-GOLD - 1 1/2`` x 15` Roll  Item #: 010394  $32.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 1 1/2`` x 30` Roll  Item #: 010395  $66.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 12`` x 12`` Sheet  Item #: 010391  $22.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 2`` x 15` Roll  Item #: 010396  $40.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 2`` x 30` Roll  Item #: 010397  $76.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 24`` x 150` Roll  Item #: 010390  $43.56 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Reflect-A-GOLD - 24`` x 24`` Sheet  Item #: 010393  $62.95 A high performance reflector born in the aerospace industry for use in extreme temperature swing environments. This state-of-the-art polymer material is extremely light weight and capable of handling continual operating temperatures up to 850 degrees F reflecting up to 80% of that heat. This highly conformable material is easy to install & remove and available in various configurations including rolls and cut sheets.
	Speed Sleeves - Exhaust Sleeve 8 Cylinder kit  Item #: 010115  $98.95 The perfect answer to tight spaces, makes wrapping your headers a snap. This kit provides everything you need to cover your primary pipes on your exhaust. They are easily installed in tight engine compartments. Great for trouble shooting specific components that are close to the exhaust like ignition wires or fuel line. A fantastic alternative to wrapping the entire header. Kit includes enough material for any engine 2-8 cylinders Quick and simple installation Provides spot protection For use when wrapping the entire header is not practical
	Speed Sleeves - Exhaust Sleeves 4 & 6 Cylinder kit  Item #: 010114  $78.95 The perfect answer to tight spaces, makes wrapping your headers a snap. This kit provides everything you need to cover your primary pipes on your exhaust. They are easily installed in tight engine compartments. Great for trouble shooting specific components that are close to the exhaust like ignition wires or fuel line. A fantastic alternative to wrapping the entire header. Kit includes enough material for any engine 2-8 cylinders Quick and simple installation Provides spot protection For use when wrapping the entire header is not practical
	T3 Titanium Turbo Shield  Item #: 010140  $230.48 Design Engineering's custom-fit T3 Titanium Turbo Shield with LR Technology provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces. Made from pulverized lava rock, the T3 Titanium Turbo Shield can withstand can withstand 1800°F of direct heat thus reducing underhood temperatures. The result - cooler air intake temperatures for improved performance and a boost in horsepower.
	T3 Titanium Turbo Shield Kit  Item #: 010141  $251.76 Design Engineering's custom-fit T3 Titanium Turbo Shield with LR Technology provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces. Made from pulverized lava rock, the T3 Titanium Turbo Shield can withstand can withstand 1800°F of direct heat thus reducing underhood temperatures. The result - cooler air intake temperatures for improved performance and a boost in horsepower. Each T3 Titanium Shield kit includes: Shield, 2" x 15 ft roll of Titanium Wrap, two 14" stainless steel T3 Turbo Shield Only zip ties and 5 ft of fastening wire.
	Turbo Insulation Kit-Universal  Item #: 010113  $95.95 This turbo kit is designed to fit all turbos from the sport compact turbos to the large over the road trucks. Designed to reduce turbo lag and reduce under hood temperatures, the Turbo Insulation Kit adds additional horsepower while protecting costly components from unwanted heat. The kit comes complete with all the materials necessary for a clean, professional looking installation. Designed to reduce turbo lag and under hood temperatures Universal application to fit all turbos Greatly reduces underhood temperatures Easy to install for professional look
	Versa-Shield Universal Heat Shield 7``x24``  Item #: 010402  $34.05 Originally designed to protect starters from heat, Versa-Shield™ can also be used to protect cool cans, carburetors, fuel pumps and many more areas of a car, boat, RV or heavy-duty truck. It has also been found helpful for shielding electrical boxes and instruments from intense heat. Versa-Shield can easily be cut to shape, and attaches to itself with hook and loop material. Versa-Shield will fit most starter assemblies. Simply cut off excess material with scissors or a sharp knife. For use around starter, carburetor, fuel pump, cool can, master cylinders & more The only starter shield with hook & loop closure Easily cut to size with scissors or a sharp knife. Controls starter heat soak- “No Start”

Customer Service: Service@PowerSportsFX.com   720-445-5383