Used by the Team Graves Yamaha Supermoto race team, this throttle tube is made from CNC-machined aluminum and hard anodized. It features an open end for use with hand guards. This throttle tube is stronger, more durable and is a direct replacement for the OEM plastic throttle tube.

As required by racing organizations, you need to route the vent hoses from your carburetor to a catch tank. This aluminum carburetor catch tank will hold the vent lines and capture any overflow from your carburetor and keep dirt out of your vent lines. Designed to be used with .125” ID fuel hose (not included). This catch tank can be used on any make of motorcycle.

Dynatek’s FS Ignition was specially developed for the Team Graves Yamaha Supermoto bikes. The ignition comes preprogrammed for optimized power and torque, utilizing the same maps used by the Team Graves Yamaha Supermoto Race Team. Software is available to program maps to suit your needs.

Dynatek’s FS Ignition was specially developed for the Team Graves Yamaha Supermoto bikes. The ignition comes preprogrammed for optimized power and torque, utilizing the same maps used by the Team Graves Yamaha Supermoto Race Team. Software is available to program maps to suit your needs.

Dynojet offers a wide range of jet kits to fit any application. Whether you run a standard or a tuned motorcycle, Dynojet Jet Kits can provide you with a simple and affordable solution to all your carburation requirements. Dynojet Jet Kits increase power and smoothness throughout the entire power band, while maintaining optimum fuel economy.
These are the same jet kits used by the Team Graves Yamaha Supermoto race team.
Type: Stage 1

Dynojet offers a wide range of jet kits to fit any application. Whether you run a standard or a tuned motorcycle, Dynojet Jet Kits can provide you with a simple and affordable solution to all your carburation requirements. Dynojet Jet Kits increase power and smoothness throughout the entire power band, while maintaining optimum fuel economy.
These are the same jet kits used by the Team Graves Yamaha Supermoto race team.
Type: Stage 1

Hand-made-in-the-USA Pro ATV Competition full exhaust systems for the 2007-08 Yamaha YFZ450. Big gains in horsepower are achieved while eliminating 5.8 lbs of weight. This high performance exhaust system features a stainless steel head pipe and mid pipe with a titanium or carbon fiber silencer. You will need to rejet with these exhaust systems.
Please note that this system is track only due to no spark arrestor.

Developed by the Team Graves Yamaha supermoto team, this is the same part we use on our factory supermoto race bikes as well as Team Yamaha Motocross Race Bikes. Raising the footpegs up 10mm for added ground clearance and improved riding position. Made from billet steel for maximum strength then coated with a corrosion inhibiter for added durability.
Designed for use with any footpeg that fits the stock mounts.

Used by the Team-Graves Yamaha Supermoto race team, these camshafts (intake and exhaust) deliver exceptional power gains in the upper RPM range. These camshafts require the use of the Graves Motorsports Supermoto Piston Kit.

Used by the Team-Graves Yamaha Supermoto race team, these camshafts (intake and exhaust) deliver exceptional power gains in the upper RPM range. These camshafts require the use of the Graves Motorsports Supermoto Piston Kit.

Designed to keep the chain from contacting the rear wheel, this item is a must have for any supermoto bike. Developed by the Team Graves Yamaha Supermoto Race Team, this is the same part we use on our fac- tory supermoto race bikes.

Developed by the Team Graves Yamaha Supermoto Team for use on the Yamaha Supermoto race bikes. This piston is compatible with oversize valves, higher lift cams and incorporate an “X” style forging for additional strength, durability and weight reduction.
These pistons represent the highest quality and are engineered for maximum power. Includes new circlips and wrist pin (250 only).
Uses the stock piston rings.

Developed by the Team Graves Yamaha Supermoto Team for use on the Yamaha Supermoto race bikes. This piston is compatible with oversize valves, higher lift cams and incorporate an “X” style forging for additional strength, durability and weight reduction.
These pistons represent the highest quality and are engineered for maximum power. Includes new circlips and wrist pin (250 only).
Uses the stock piston rings.

Graves Motorsports 100% Titanium foot pegs are 20mm shorter than stock, 10mm higher than stock and 5mm wider than the stock pegs. The rider will have the advantage of increased ground clearance and better rider feel. These pegs are a direct replacement for the stock pegs.

Specially designed for the optimum suspension set-up of supermoto motorcycles these CNC’ed billet aluminum triple clamps feature a 13mm offset and a pre-installed steering stem.
The handlebar clamps offer two positions, with a difference of 14mm between the fore and aft positions. The handlebar clamps are designed to be used with ProTaper handlebars or any 1-1/8” diameter handlebars.

YZ250F kit includes high performance dual springs, titanium retainers, lower collars and new exhaust valve seals.

YZ450F kit includes high performance dual springs, titanium retainers, lower collars and new exhaust and intake valve seals.

Graves Motorsports CTC tire warmers offer incredible performance at an affordable price. Our tire warmers are constructed with a wear resistant outer shell for improved durability. These tire warmers are designed with performance in mind with the warmers cycling at 70 degrees Celsius (160 degrees Fahrenheit) to ensure tires don’t get overheated and are ready to go at race time. These two stage tire warmers feature an LED light to show when tires have achieved optimum cycling temperature, when the green light is on the tires are ready to go!
Only available in black. Sold individually (front & rear).

Graves Motorsports CTC tire warmers offer incredible performance at an affordable price. Our tire warmers are constructed with a wear resistant outer shell for improved durability. These tire warmers are designed with performance in mind with the warmers cycling at 70 degrees Celsius (160 degrees Fahrenheit) to ensure tires don’t get overheated and are ready to go at race time. These two stage tire warmers feature an LED light to show when tires have achieved optimum cycling temperature, when the green light is on the tires are ready to go!
Only available in black. Sold individually (front & rear).

Graves Motorsports CTC tire warmers offer incredible performance at an affordable price. Our tire warmers are constructed with a wear resistant outer shell for improved durability. These tire warmers are designed with performance in mind with the warmers cycling at 70 degrees Celsius (160 degrees Fahrenheit) to ensure tires don’t get overheated and are ready to go at race time. These two stage tire warmers feature an LED light to show when tires have achieved optimum cycling temperature, when the green light is on the tires are ready to go!
Only available in black. Sold individually (front & rear).