|
|
|
|
| Application Chart |
Diagrams |
Application
Notes |
|
| 2000 Suzuki DRZ 400 |
|
OEM: 15, Range: 13- 16 |
| 2001 Suzuki DRZ 400 |
|
OEM: 15, Range: 13- 16 |
| 2002 Suzuki DRZ 400 |
|
OEM: 15, Range: 13- 16 |
| 2003 Suzuki DRZ 400 |
|
OEM: 15, Range: 13- 16 |
| 2004 Suzuki DRZ 400 |
|
OEM: 15, Range: 13- 16 |
| 2005 Suzuki DRZ 400 |
|
OEM: 15, Range: 13- 16 |
| 2006 Suzuki DRZ 400 |
|
OEM: 15, Range: 13- 16 |
| 2007 Suzuki DRZ 400 |
|
OEM: 15, Range: 13- 16 |
| 2008 Suzuki DRZ 400 |
|
|
| 2007 Suzuki DRZ 400 SM |
|
|
| 2008 Suzuki DRZ 400 SM |
|
|
|
|
|
|
|
|
|
|
| This item does NOT ship for free |
| Shipping charges will apply to this item. If you place your order now we will call with the shipping rate. If the rate is approved by you we will charge you the additional shipping. If the rate is NOT approved by you then we will cancel your order. If you do not wish to place your order now you can enter in the quantity you wish to order and your zip code in the Q&A section below and we will respond with a quote. |
|
|
|
| Fits:
RMX 250 1989-2001
DR 350 1991-1993
DR 350R 1994-1999
DR 350S 1990-1993
DR 350SE 1994-1998
DRZ 400 E/S 2000-2004
DRZ 400SM 2000-2008
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: I HAVE 2011 DRZ 400E AND WANT TO KNOW WHAT IS THE BEST SPROCKET COMBO FOR HI WAY USE DO I JUST CHANGE THE FRONT TO A 15 TOOTH OR WHAT PLEASE HELP ME CHEERS GUYS. |
| ANSWER: It's most common to switch the front to a 16T |
|
| QUESTION: I have a stock 2009 drz 400 will astock chain work with a 14-47 sprocket combo |
| ANSWER: IF ITS AN S THE YES |
|
| QUESTION: US 06' drz400sm- What is the difference between just changing the the back sprocket to a 38 vs changing front to a 16 along with the back to a 38? |
| ANSWER: you get more rpm to use on the hwy |
|
| QUESTION: US 06' drz400sm- I have a 60 mile highway commute so I want to drop rpm's on the highway but I don't want the torque to really suffer for town an fun... What's the difference in doing either a 16 front or 38 rear VS 16 front AND 39 rear?... An do I have to change the stock chain for either combo?... Thank you. |
| ANSWER: not much of a change 38 or 39 almost the same make sure you use a new chain |
|
| QUESTION: I have a 2007 DRZ 400S. If I put a 13 tooth front sprocket on, do I have to take any links out of the chain? |
| ANSWER: NO AS LONG AS ITS A NEW CHAIN |
|
| QUESTION: I have a 2007 DRZ 400 S, if I install 15/47 how many links would my chain need to have? |
| ANSWER: 116 |
|
| QUESTION: My bike is a 2002 Suzuki DRZ 400 "S". I wish to buy some type of O-Ring Chain and a 14/47 sprocket combination. Please let me know which of your products I need. Thanks |
| ANSWER: 1024-520-14 front 5028-520-47 rear 520 srx 120 links |
|
| QUESTION: this may be a little off topic, but i have a trx250x, i ordered a 14, 39 setup, will this ride okay, will it be more speed or torque, i also have a 13 front, what should i do for better torque |
| ANSWER: for more tourqe use the 13 the 14 will give you more top end speed |
|
| QUESTION: I have a 2007 DRZ400S. Your application chart shows DRZ 400 E/S 2000-2004 for item no. 1024. Will the 16T fit the 07? Also, I'm reading that I may have to "grind" the chain guard? What exactly does that mean? |
| ANSWER: YES IT WILL FIT AND YOU WILL HAVE TO GRIND THE CHAIN GUARD WITH A FILE OR A DREMEL TOOL |
|
| QUESTION: I have a 2004 drz 400s and I want to get the best combo for the hiway what set up do you recomend... I have a 44 on the rear now not sure about the front i think its stock.Thanks |
| ANSWER: 16-43 WILL WORK BEST FOR HWY USE |
|
| QUESTION: Im doing a 14/43 on a 06 drz400sm, what size and how many link chain do I need?
Thanx |
| ANSWER: 520 X 112 |
|
| QUESTION: 2007 drz400s going from 15/44 to a 14/44, will I have to remove any links from the chain. |
| ANSWER: no you should be fine |
|
| QUESTION: Need to know what side of the counter shaft sprocket faces the engine. I think it is the collar side but I am nor sure due to the lock tab that is bent over after installation of the nut on the shaft. |
| ANSWER: WRITING FACING YOU |
|
| QUESTION: how many links should i use on a DRZ400Sm with 15-38 sprockets |
| ANSWER: 110 links |
|
| QUESTION: '01 drz 400s. ran stock on the trail, not enough low end. want to go to a 11/53, your chart says only 13t front. Can I do this and what size chain?? if not how can i get more punch off the start?? no highway riding |
| ANSWER: 15-44 is stock 11-53 is too much
just go to a 13-44 and try it |
|
| QUESTION: I have a 2001 DRZ 400 S and am soon converting it to a motard. I bought the wheels and they come with a 39 tooth rear sprocket and a 16 tooth front sprocket. How much different will this be than my stock S sprockets as far as top speed goes? I've clocked it at 94 mph before, but I believe my speedometer runs about 3-4 mph fast. Thanks a lot! |
| ANSWER: you will be able to do 110 at the same rpm |
|
| QUESTION: im running a 15/38 on my drz how many links should i take out of the chain? |
| ANSWER: if its an sm 2 |
|
| QUESTION: I need more top end crusing spead for my 07 400sm and think a 16 front and 38 rear sounds best. will I need to change chain? and how do I go about ordering all the bits.I'm in the UK |
| ANSWER: 16-38 is the best set up for top speed and you can just order of the site |
|
| QUESTION: I ride street during the week and trails on the weekends, can I run a 15/41 and a 12/41 on the same chain? 110 Links I think. |
| ANSWER: no you can't with the 12-41 the chain will be too loose |
|
| QUESTION: I have a 02 DRZ400 S with stock gearing. I want more torque, I do mostly off road, so I want to drop front sprocket to 13 teeth. My chain tightener is on 5 right now. Will this work or will I need a shorter chain and if so what size of chain? Thank you |
| ANSWER: it should work |
|
| QUESTION: Hi, i have an SM with 21" front and 18" rear, 15/41 and I need to be able to hit 120km/h on highway but need as most low end as possible for trail whats would you recommend. |
| ANSWER: 16-38 |
|
| QUESTION: you can save ten dollars and alot more on shipping if you order the same sprocket from driven racing directly RIGHT? |
| ANSWER: no |
|
| QUESTION: I have a 2001 drz 400e that I put the baja kit on and I am running a 16/47 but still want more top end. Will my 112 link chain work on 16/44 gearing? Thanks for all you help! |
| ANSWER: Yes, you may need to cut 2 links and use a new masterlink. |
|
| QUESTION: (06 drz sm)Will a 38 or 39 rear sprocket fit with the stock chain? is a change to just a 16 tooth noticable? Can i run a 17t front on my bike or will i have to do more than just grind down the chain cover? any others running a 17t front? THANK YOU jimmy. |
| ANSWER: you will need to shorten the chain,yes a 16 will be noticable a 17 will not fit. |
|
| QUESTION: are the drz400sm different in Canada/US - swingarm widthwise? what is the best sprocket setting for trail torque and hiway without changing the chain's length?
thanks. |
| ANSWER: YES AS FAR AS WE KNOW
16-40 |
|
| QUESTION: 05 dr-z400sm, looking for better highway, but don't want to sacrifice too much torque. (16-39?). Will the guard need to be modified? Different chain length? Please help w/part #'s. |
| ANSWER: 1024-520-16
5028-520-39
|
|
| QUESTION: if i change my gearing to a 16t front on my drzsm 05 will it affect my speedo, i mean its read off the front wheel, will it still read the correct speed. thx |
| ANSWER: yes it will read the same |
|
| QUESTION: what speed can you reach with a 16-39 on a 400 sm |
| ANSWER: 15% increase |
|
| QUESTION: Have a 400s model. Am converting to SM use. Was going for the 15/41 option.What length chain will i need.Lots of talk on the 16/38 or 39. Need yr advise b4 i order as in UK. Is the rear trailing arm same length on 'S' and 'SM'
Thanks. |
| ANSWER: For sm(not street use) 15-41 and you will need a 112 links |
|
| QUESTION: sounds like 16/39 is about the limit w/o chain modification. how much will this lower my rpms on a 2008 SM? thanks! |
| ANSWER: It will be a noticable differnce, and will be more suited for highway use. |
|
| QUESTION: 09 drz400sm,i have your 16t but not installed yet, what is the smallest or best fit rear sprocket that i can use with the stock chain links{110}? |
| ANSWER: 40 tooth |
|
| QUESTION: i have a 09 drz sm and want more highway speed i was thinking of going to a 38 rear what would my cruzing speed be? i need 75 to 80mph |
| ANSWER: A 38T will work very well for the highway. You may also want to consider running a 16T front if your not already. |
|
| QUESTION: Do your sprockets also fit 2009 DRZ400SM? Your chart only shows up to 2008. |
| ANSWER: yes they are the same |
|
| QUESTION: I have a 2007drz 400e, can i leave the stock rear sprocket on and put an 11 on the front, and am I gonna need a new chain. I really want to gear this bike down low I do alot of mountain trail riding, speed is not important to me. |
| ANSWER: 13 is the smallest you want to go |
|
| QUESTION: Hello,
I’d like to add a 15t front sprocket to a drz400e. Will this be a direct fit or are there other parts that I need to order? Can you fill me in on what I will need in order to mount the 15t without doing any cutting/grinding?
Thanks,
Tony
|
| ANSWER: 15 will fit right in no mods requierd |
|
| QUESTION: I have a 03 DRZ-400S with a 14 front and 50 rear what size chain whould i need? |
| ANSWER: 116 links |
|
| QUESTION: hey, does the shoulder on the front sprocket go to the inside or out, I did not remove the original so i am kinda lost, 16 tooth drz 400 |
| ANSWER: YES THE OUTSIDE |
|
| QUESTION: Do you have 16 or 17 tooths front sprocket and 39 tooth rear for a 2009 Suzuki DRZ400SM? How much to ship to Canada? Thanks. |
| ANSWER: YES WE DO ABOUT $20 |
|
| QUESTION: I ride a 00 DRZ400S stock sprocket set-up. I'd like to have more torque to get the front end up off the ground but do not want to sacrifice top end speed as I live in a metropolitan area and highways are the quickest way around town. What is going to be the best set-up and what size chain would i need? |
| ANSWER: TO DO BOTH WELL STOCK IF YOU WANT JUS TA LITTLE "GET UP AND GO" GO -1 IN THE FRONT YOU WILL ONLY LOOSE 5% ON THE TOP |
|
| QUESTION: i have a drz 400e I mostly trail ride also ride aspault 30% of the time top speed is 65 mph. How low of gearing can i go and still safely ride at 65 mph. |
| ANSWER: go down one in the front |
|
| QUESTION: I have a stock 2009 DRZ400S and want a little more low end power for trails, less highway top end is fine..What should I do - use stock 15 front with 48 rear or just replace front with 14 and leave rear stock? |
| ANSWER: just go -1 in the front |
|
| QUESTION: Hello I have a 2008 DRZ 400S, I would like to know what is the best sprocket set up for getting the front end up. Top speed isn't that important as long as its over 120 km/hr. What is your recommendation? |
| ANSWER: 16-40 |
|
| QUESTION: I have a 06 drz400s. I want to put a 16 tooth front and a 39 tooth rear. Do i have to take any links out of my stock chain? |
| ANSWER: no it will still work |
|
| QUESTION: Hi, I have converted my DRZ400E to SM what kind of gearing is 14 43 going to give me? |
| ANSWER: more top and then before i would recomend 15-41 |
|
| QUESTION: I have heard on a number of websites that the front sprocket cover requires some alteration in order that the sprocket does not come into contact with the cover, is that correct?
|
| ANSWER: only with the 16 tooth |
|
| QUESTION: I have a 2006 drz 400sm all stock. would like less rpm at hiway speed. not concerned about doing wheelies. do i need to change both sprockets? or change the chain? Let me know what the best set up is
thanks
Hal |
| ANSWER: you can do a 16 front and you are done!
1024-52-16 |
|
| QUESTION: I have a 2007 DRZ400SM, I would like to change the sprockets to give me more highway speed as it really raps out with the stock gearing. Can I just change the front sprocket to provide this? If so what size should I buy? Thanks! |
| ANSWER: yes 16 tooth
1024-520-16 |
|
| QUESTION: I have a 08 drz 400 sm.. What would be my best bet so i could bring the front end up easier and not lower my top speed much lower than 80mph.. I mostly ride in the city but i live out in the country.. |
| ANSWER: 16-39 WOULD BE GOOD |
|
| QUESTION: i have got a 200cc chinese bike with a 200cc yamaha motor. won't do a mono so i am looking for a sprocket that mite be able to give me more power and do a mono. how many teeth should the rear sprocket have and do i need to change the front sprocket as well. wat ratio |
| ANSWER: make sure you let us know what make year model yamaha motor it is and call customer service |
|
| QUESTION: i have a 200cc bike and are trying to do a mono on it. for the rear sprocket do i need like a 40 tooth rear sprocket or a 15 tooth rear sprocket to do a mono. and do i need to change my front sprocket to get a better performance and mono |
| ANSWER: what bike a suzuki drz 400 ? |
|
| QUESTION: I have an 03 Drz400s and I want increased my highway speed. My buddy gave me a 41t off his sm can I put this on mine? How much will it help? and how many links will I need to remove from my chain? |
| ANSWER: it will work just fine and you will need to remove 2 links to 110 links |
|
| QUESTION: whats the PRIME ratio for the highest possible highway speed, without sacrificing too much low end. 2009 DRZ400SM |
| ANSWER: 16-39 |
|
| QUESTION: I have a 520x112 O-Ring chain.Would a 15/front 38/rear combo work for this chain on a 2006 DRZ 400SM? Or would a 16/39 combo be better for this chain? I'm looking for lower RPM's on freeway. Would I have to grind anything with the 16. If so, do you send general instructions/pictures for grinding the 16? |
| ANSWER: you will have to cut it down to 108 with the 15-38
16-38/39 is the best combo and you will need 110 for that |
|
| QUESTION: I have a stock 2007 DRZ400E and just purchased the 52 tooth rear sprocket. How will this affect my bike and do I need to do more to it. I ride off road. Thanks... |
| ANSWER: you will get more low end tourqe see how you like before doing any thing else |
|
| QUESTION: I have a 2003 drz 400s. I'm going to need new chain and spkts. what gearing do you suggest, i ride mainly on lanes so increasing top end speed is not priority. i dont want to do any mods to make them fit. |
| ANSWER: the just go down 1 in the front so it will be 14-44 |
|
| QUESTION: I have an 07 Drz400s. I'm going on a long road trip and I want a sprocket combo that will be good for topend on the highway, but still have enought low end power for offroad. I think the combo right now is 15/44, which sounds like the motor is going to blow up at 70mph. What would be a better combo? Also, is there a break in period after switching sprockets/chain? |
| ANSWER: 16 38 will be great for that |
|
| QUESTION: what kind of gearing is 16 48 going to give me on my 400SM |
| ANSWER: low end only |
|
| QUESTION: I have a stock 2001 drz400s with 15/44 sprockets 520x112 o ring chain all stock my rear adjustment is set on 4 can i go to a 14/47 & not shorten the chain Thanks Bill |
| ANSWER: probebly not |
|
| QUESTION: CAN I RUN A 14\49 ON A DRZ400 WITH THE STOCK CHAIN 520 X 112 |
| ANSWER: no! you will need a 114 link chain |
|
| QUESTION: I have a 2001 Suzuki DRZ400S which has had the carb jetted with a dynojet stage one carb jetting kit. It also has a yoshi header on it. My question is can I put a K&N air filter on the bike without making any adjustments to the carb and without causing any damage to the bike due to it possibly running to lean due to the above mods? Thanx |
| ANSWER: changing the filter you will have to adj the carbs |
|
| QUESTION: I have a stock 2001 drz400s with 15/44 sprockets 520x112 o ring chain all stock my rear adjustment is set on 4 can i go to a 14/44 & not shorten the chain Thanks Bill |
| ANSWER: YOU SHOULD BE ABLE TO THE WHEEL WILL GO BACK ABOUT 1/2" |
|
| QUESTION: I have a stock 2001 drz400s with 15/44 sprockets 520x112 o ring chain all stock my rear adjustment is set on 4 can i go to a 13/44 & not shorten the chain or will i be limited to a 14/44 combination ?
Thanks
Bill |
| ANSWER: you will have to shorten your chain |
|
| QUESTION: What's the Standard sprockes on the drz400E 2006, with wheels 21" and 18" |
| ANSWER: 16-47 |
|
| QUESTION: I have a 2000 DRZ400S. Will the stock chain fit with a 16/39 Sprocket Combo? |
| ANSWER: it should |
|
| QUESTION: I want to set up a DRZ400E for Track Days. What is a good sprocket combination? |
| ANSWER: FOR TOP SPEED 16-38 FOR LOW DOWN POWER 15-41 |
|
| QUESTION: I also just bought a DRZ400S and want to buy a 16T counter sprocket to lower rpm at 70 mph, will I have to grind anything or make any mods to make it fit? Also how much relief will the engine rpm get at 70 mph vs a 15T(stock now)? Sorry I left out the year, its an 08 |
| ANSWER: YOU WILL NEED TO GRIND THE CHAIN GUARD 10MM AND AT 70 YOUR RPM WILL DROP ABOUT 15% |
|
| QUESTION: I have a 09 400sm and I want to make it easier to get the front end up. What set up do you recomend? I ride mostly city. |
| ANSWER: kwwp th 15 front and go to 43,44 rear keep in mind your top speed will go down by about 10-15% |
|
| QUESTION: i have a stock 07 drz400sm-would like more acceleration without doing pipe mods etc, what gearing do u recommend-i dont highway this bike
regards nathan |
| ANSWER: 14-43 |
|
| QUESTION: we just bought A 2007 drz suzuki 400 it is too tall how can we go buy lowering it?? |
| ANSWER: talk to your suzuki dealer or suspension expert |
|
| QUESTION: if I change my stock drz400 sprockets to 16 front and 39 rear what size chain do I need and do you have it? |
| ANSWER: DEPENDING ON THE MODLE (S,SM,L)110 OR 112 |
|
| QUESTION: make sure i got this right (07 drz400s) with a 16 tooth front, i have to grind on front chain gaurd and to go from front 13 to 16 tooth, i'll have to have different chains? adjustment on rear not enough? (with 42 rear) |
| ANSWER: correct you can use your chain and adjust it to fit as long as its in good shape you want the 16 for highway use. |
|
| QUESTION: I have a 2000 DRZ400S and want to install 39 rear and 15 front. Do I need to shorten chain? Also, can I go back to 13 or 14 front once it's shortened? |
| ANSWER: yes you do and yes you can go back to a 14- or a 13 you will need to take 2 pins out |
|
| QUESTION: I have a stock 06 drz400SM but would like to set it up a little more for highway use. From the other Q&A's, I can go with a 16 front or a 38/39 rear. Is the front or rear sprocket easier to change? |
| ANSWER: BOTH ARE EASY TO DO |
|
| QUESTION: I have an 05 kfx 400 looking to get more power coming out of the turns and I need a little more 3rd gear acceleration I'm barley clearing jumps. Will a 13 tooth sprocket help me??? I'm still running the stock one. |
| ANSWER: YES IT SURE WILL |
|
| QUESTION: i have a 05 drz400e it does bout 70mph on road 14 tooth on front 47on back i want less speed more acceleration what ratio do you suggest |
| ANSWER: GO TO A 49 REAR |
|
| QUESTION: hi, will the 16 tooth fit a uk drz400sm k7? also do you ship to the uk and how much in total? what's the deal with returns too?
thanks |
| ANSWER: yes it will and yes we do. |
|
| QUESTION: if i drop my front gearing down to a 13 and leave the rear stock will it give me more low end without greatly dropping my top speeds, and will it fit on a 08 drz400sm? |
| ANSWER: yes and yes it will fit your bike |
|
| QUESTION: Hi. I want to know if you have item no. 1024-520-16 in stock. Please advice. |
| ANSWER: yes we do! |
|
| QUESTION: will the 16 tooth front sprocket fit on my 2002 drz400e without any modifications.if not, would lowering my rear tooth number to 42 be better for road and highway riding
|
| ANSWER: for the 16 you will need to trim the case guard other wise try to go dpwn to a 40 or a 41 |
|
| QUESTION: I have a 2008 DRZ 400. Will the 16 tooth sprocket fit this model? If so, which part number should I use? |
| ANSWER: 1024-520-16 AND YES IT WILL FIT |
|
| QUESTION: how does the sprocket go on? shoulder to engine? |
| ANSWER: i think with the marking facing out |
|
| QUESTION: I have the above enduro dirt bike do you have a stock front 15 tooth sprocket...and a rear, i would like a 43 or 44 to fit tks Leo Lecavalier edmonton alberta canada |
| ANSWER: yes we do on all |
|
| QUESTION: How come you say you ship to Canada but in the form to be filled in, there is no choice but "United States", and in the Zip code section, it is only US states?
Thanks
Robert |
| ANSWER: we do ship to canada just fill the form with your info. |
|
| QUESTION: Hi, I'm still confused!! I've a 2007 DRZ400SM that I'd like to have higher gearing. A 16 front seems an obvious choice but I don't want to grind / cut anything - so will it foul? Also the standard rear is a 41 so if I keep the front standard would dropping the rear to a 39 acheive similar results? |
| ANSWER: well then the 16 is not for you but the 38(not 39) is. |
|
| QUESTION: Driven USA MX Front Sprocket Suzuki DRZ 400 00-06
Can you ship to Canada ?
If yes, how much for Baie-Comeau, Quebec, Canada
postal code G5C 3T1 |
| ANSWER: YES ABOUT $10 |
|
| QUESTION: 2006 DRZ400S -with your 16 T front sproket , do I need to modify any chain gurds or anything else? |
| ANSWER: yes you have to grind the front chain guard |
|
| QUESTION: Hi!
I have a 2006 suzuki drz400sm. And I need both sprockets and the chain. Do you sell all of these? How much are they? Will the bike be a little faster if I go to a 16 tooth sprocket in the front?
Thanks! |
| ANSWER: YES WE DO PAT NUMBERS ARE 5028-520-XX FOR THE REAR 1024-520-16? FOR THE FRONT
AND YOU CAN USE THE 520 SRX CHAIN 16 FRONT IS BY FAR OUR BEST SELLERS FOR THE SM WITH A 38/39 REAR. |
|
| QUESTION: I'm in the UK. When I complete the online order form I'm not given a country selection option.
How do I place a UK order for a 16t DRZ400SM front sprocket?
Thanks. |
| ANSWER: just enter your uk address |
|
| QUESTION: Two questions concerning my 2006 DRZ400SM:
1) If I go to a 16t front sprocket do you know if I will need to add links to the stock chain?
2) Do you ship to the UK? |
| ANSWER: WE HAVE THE 16 FRONT YES YOU CAN USE THE STOCK CHAIN AND YES WE SHIP TO THE U.K ABOUT $20.00 |
|
| QUESTION: The application chart above states range 13 to 15
But a 16 tooth will work according to your Q and A Please explain ? |
| ANSWER: 16 is the most popular for your bike(in street application.i.e sm model ) it will work and part # is 1024-520-16 |
|
| QUESTION: 05 400sm. i need more torque from the start tell me what up |
| ANSWER: yo can go to a 14 front or a 42/43 rear |
|
| QUESTION: I just got a 2007 400SM. Will this 16 tooth fit this model? Do you ship to Canada? |
| ANSWER: Yes, a 16 tooth will fit. We ship to Canada, no problem. |
|
| QUESTION: Do you have a set of sprockets for the drz400s? 16 tooth front, and a 39 or 40 tooth rear. |
| ANSWER: We have them in stock - front 1024-520, rear 5028-520 |
|
| QUESTION: I have a 05 drz400s and would like to know the best sprocket set up for trail riding. Also the best for freeway travel. Thanks |
| ANSWER: freeway travel best will be 15 or 16 front with a 39 or 40 rear
trail 15 front 48 rear |
|
| QUESTION: I just picked up a 2000 drz400 and would like to lower the gears for better trail riding the curent chain, front and rear sprockes are new but would replace as needed any recomendations thanks |
| ANSWER: go one down in the front to a 14 |
|
| QUESTION: Will this fit an 06 drz 400, and do u have any bigger sizes. |
| ANSWER: yes and all the way to 52 |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Schedule
powered by WordPress e-commerce company