|
|
|
|
|
|
|
|
|
|
|
|
|
| This item does NOT ship for free |
| Shipping charges will apply to this item. If you place your order now we will call with the shipping rate. If the rate is approved by you we will charge you the additional shipping. If the rate is NOT approved by you then we will cancel your order. If you do not wish to place your order now you can enter in the quantity you wish to order and your zip code in the Q&A section below and we will respond with a quote. |
|
|
|
|
Galfer Brake Line kits are made with Dupont Teflon Steel braided cable. There are 16 braided lines of steel around the inner section, making the line expansion close to zero under all conditions.
|
|
Galfer hoses meet or exceed the following tests and requirements: SAEJ 1401, UNE 26-399-89, ISO 3996. Temperature range : -67/ +464(f). Braking power, Galfer lines will require less pressure at the brake lever to stop the bike, allowing the rider to use less force and stop faster.
|
|
All Brake lines are coated the entire length of the line to protect the bike from scratches and the brake fluid from humidity. |
|
All Galfer pre-made brake line kits include all the necessary banjo bolts and washers. |
|
All banjo bolts supplied with Galfer kits should be torqued to 13-15 ft-lbs. |
|
Photo is NOT the exact line and is for representation purposes only. |
|
Clear color hoses are more readily available and less likely to be back ordered.
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: I need a front brake line for my 1980 kawasaki z500, and any other front brake products for this bike. Will this fit? Do you have any that will? Please advise. Regards, Barbara Smith |
| ANSWER: Hello Barbara,
I do not show that we have a part number for a Z500. In order for th universal line to work you will need to know that exact length of the line on the bike, the type of banjos you will need and go from there. If you have any further questions please feel free to email me directly. steven@galferusa.com
Thanks,
Steven
Galfer USA |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Schedule
powered by WordPress e-commerce company